DSE2541 | Módulo de Pantalla de Cargador de Batería Remota

Deep Sea Electronics

OVERALL SIZE
140 mm x 113 mm x 43 mm (5.5” x 4.4” x 1.7”)
PANEL CUTOUT SIZE
118 mm x 92 mm (4.6” x 3.6”)
MAXIMUM PANEL THICKNESS
8.0mm (0.3”)
WEIGHT
0.24kg

PRODUCT VARIANTS
2541-02 – 2541 Remote Battery Charger Display Module

 

COMPRAR

Características

The DSE2541 Remote Battery Charger Display Module has been designed to work with all intelligent and enclosed battery chargers. The module displays information to the operator on charge output, charge cycle, mains (utility) supply status and indicates when fault conditions are present.

The DSE2541 enables the user to control a battery charger remotely via the front panel buttons. The DSE2541 and its connected charger can be configured using the front panel buttons.

Especificaciones

Key Features Key Benefits
Large back-lit icon LCD display. Provides clear and easy to read information pages.
Works with DSE94xx battery chargers. Operates across the range of intelligent battery chargers.
12 volt & 24 volt configurable. Flexibility and cost effectiveness of one charger to suit different voltage types.
Front panel button charger configuration. Makes programming quick and simple.
LCD alarm indication. Clear warning and indication to alert the user to an alarm.
1 volt-free change over fault output. Output provides the flexibility of the addition of an audible alarm.
Remote battery charger & charge cycle monitoring. Provides remote indication of the battery parameters and charging status.
Remote boost and battery charger output control. Provides user-friendly convenience of remote control of the charger, from a remote location.
PC/laptop free configuration. Quick and simple on-site set-up.

Detalles

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT
80 mA at 12 V, 75 mA at 24 V

MAXIMUM STANDBY CURRENT
65 mA at 12 V, 60 mA at 24 V

FAULT OUTPUT

3 A at 30 V DC volt-free relay